預覽WAGO接線端子281-620
如果您對該產品感興趣的話,可以
產品名稱: 預覽WAGO接線端子281-620
產品型號: WAGO 284-681
產品展商: WAGO
產品文檔: 無相關文檔
簡單介紹
接線參數
連接點總數 4
電位總數量 2
層數 2
連接1
預覽WAGO接線端子281-620
的詳細介紹
預覽WAGO接線端子281-620
雙層接線端子; 普通/普通接線端子; 下層有額外的跨接器位置; 適于35 x 15 和 35 x 7.5導軌; 4 mm2; 4,00 mm2; 灰色
電氣參數
額定電氣參數參照IEC/EN標準
額定電氣參數 IEC/EN 60947-7-1
額定電壓(III/3) 500V
額定浪涌電壓(III/3) 6kV
額定電流 26A
圖例(額定電氣參數) (III / 3) ? 過電壓類別III/污染等級3
Power loss
Power loss, per pole (potential) 0.676W
Rated current IN for specified power loss 26A
Resistance value for specified, current-dependent power loss 0.001Ω
接線參數
連接點總數 4
電位總數量 2
層數 2
連接1
連接技術 籠式彈簧接線單元(CAGE CLAMP®)
執行類型 操作工具
可連接導線材料 銅
鋁
可連接導線材料說明 Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm2/12 AWG if WAGO “Alu-Plus” Contact Paste 249-130 is used for termination.
“Alu-Plus” Contact Paste Advantages:
Automatically destroys the oxide film during clamping.
Prevents fresh oxidation at the clamping point.
Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
Provides long-term protection against corrosion.
Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.
It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.
Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::
2.5 mm2 = 16 A
4 mm2 = 22 A
單股導線 0.08 … 4 mm2 / 28 … 12 AWG
細多股導線 0.08 … 4 mm2 / 28 … 12 AWG
剝線長度 9 … 10 mm / 0.35 … 0.39 inches
布線方向 正面接線
物理數據
寬度 6 mm / 0.236 inches
*度 83.5 mm / 3.287 inches
以DIN導軌的上邊線為基準的深度 58.5 mm / 2.303 inches
機械參數
設計 水平型
安裝方式 DIN-35型導軌
標記位 中央標記位
材料參數
Note (material data) Information on material data can be found here
顏色 灰色
絕緣材料組別 I
絕緣材料 尼龍(PA 66)
UL94阻燃等級 V0
火災荷載 0.029MJ
重量 15.3g
環境要求
工作溫度 -35 … +85 °C
持續工作溫度 -60 … +105 °C
預覽WAGO接線端子281-620
